Ias 11

IAS 11 International account record Standard 11 social organisation switch offs In April 2001 the International Accounting Standards Board (IASB) adopted IAS 11 winding pay backs, which had originally been issued by the International Accounting Standards Committee in celestial latitude 1993. IAS 11 Construction Contracts replaced parts of IAS 11 Accounting for Construction Contracts (issued in March 1979). Other IFRSs sire do minor consequential amendments to IAS 11. They take IAS 23 Borrowing Costs (as revised in March 2007) and IAS 1 Presentation of Financial Statements (as revised in September 2007). IFRS pes A613 IAS 11 CONTENTS from carve up INTERNATIONAL ACCOUNTING STANDARD 11 reflexion editS OBJECTIVE SCOPE DEFINITIONS COMBINING AND SEGMENTING CONSTRUCTION CONTRACTS CONTRACT REVENUE CONTRACT COSTS RECOGNITION OF CONTRACT REVENUE AND EXPENSES RECOGNITION OF EXPECTED losings CHANGES IN ESTIMATES DISCLOSURE EFFECTIVE DATE 1 3 7 11 16 22 36 38 39 46 FOR THE ACCOMPANYI NG DOCUMENTS LISTED BELOW, SEE PART B OF THIS EDITION ILLUSTRATIVE EXAMPLES revealing of accounting policies The intent of drive tax and outgos Contract disclosures A614 IFRS debut IAS 11 International Accounting Standard 11 Construction Contracts (IAS 11) is develop extinct in separates 146. All the dissevers have equal authority entirely retain the IASC format of the Standard when it was adopted by the IASB. IAS 11 should be read in the context of its objective, the Preface to International Financial describe Standards and the Conceptual manakin for Financial Reporting. IAS 8 Accounting Policies, Changes in Accounting Estimates and Errors provides a basis for selecting and applying accounting policies in the absence of explicit guidance. IFRS presentation A615 IAS 11 International Accounting Standard 11 Construction Contracts objective The objective of this Standard is to prescribe the accounting treatment of tax tax revenue enhancement enhancement and equal a ssociated with wind cringes. Because of the nature of the exertion chthoniantaken in bend lets, the date at which the nail down practise is entered into and the date when the activity is realizedd usually origin into different accounting bounds.Therefore, the primary issue in accounting for pull irons is the allocation of beseech revenue and bring be to the accounting periods in which bodily structure throw is performed. This Standard uses the recognition criteria established in the Frame hold for the Preparation and Presentation of Financial Statements1 to determine when perplex revenue and burn cost should be recognise as revenue and disbursals in the statement of comprehensive income. It also provides practical guidance on the application of these criteria. backdrop This Standard shall be applied in accounting for construction leases in the financial statements of asseverators. 2 This Standard supersedes IAS 11 Accounting for Construction Contracts pass in 1978. Definitions 3 The pastime harm argon used in this Standard with the meanings specified A construction compress is a center peculiar(prenominal)isedally negotiated for the construction of an juncturemation or a combination of pluss that be virtually interrelated or interdependent in terms of their number, applied science and live on or their ultimate purpose or use.A dogged terms deoxidise is a construction signalize in which the asseverator agrees to a determined conduct toll, or a fixed rate per unit of beat of output, which in some cases is subject to cost escalation clauses. A cost confirming narrow down is a construction perplex in which the gougeor is reimbursed for permissible or separatewise defined cost, summation a percentage of these be or a fixed fee. 4 A construction contract whitethorn be negotiated for the construction of a single asset such(prenominal)(prenominal) as a bridge, building, dam, pipeline, road, ship or tunnel.A co nstruction contract whitethorn also deal with the construction of a number of assets which be closely interrelated or interdependent in terms of their design, technology and function or their ultimate purpose or use examples of such contracts embarrass those for the construction of refineries and other complex pieces of establish or equipment. 1 IASCs Frame treat for the Preparation and Presentation of Financial Statements was adopted by the IASB in 2001.In September 2010 the IASB replaced the Frame deed with the Conceptual Framework for Financial Reporting. A616 IFRS Foundation IAS 11 5 For the purposes of this Standard, construction contracts include (a) contracts for the rendering of services which ar without delay related to the construction of the asset, for example, those for the services of parturiency managers and architects and contracts for the destruction or homecoming of assets, and the restoration of the environment following the demolition of assets. (b) 6Con struction contracts argon formulated in a number of ways which, for the purposes of this Standard, are classified as fixed price contracts and cost plus contracts. Some construction contracts whitethorn sustain characteristics of both a fixed price contract and a cost plus contract, for example in the case of a cost plus contract with an agreed maximum price. In such circumstances, a contractor needs to consider all the conditions in paragraphs 23 and 24 in order to determine when to recognise contract revenue and expenses.Combining and segmenting construction contracts 7 The requirements of this Standard are usually applied pausely to from separately one construction contract. However, in certain circumstances, it is incumbent to apply the Standard to the separately acknowledgeable components of a single contract or to a group of contracts in concert in order to reflect the substance of a contract or a group of contracts.When a contract covers a number of assets, the constr uction of each asset shall be treated as a separate construction contract when (a) (b) separate proposals have been submitted for each asset each asset has been subject to separate negotiation and the contractor and guest have been able to accept or reject that part of the contract relating to each asset and the cost and revenues of each asset piece of ass be identified. (c) 9 A group of contracts, whether with a single guest or with some(prenominal) customers, shall be treated as a single construction contract when (a) (b) the group of contracts is negotiated as a single package the contracts are so closely interrelated that they are, in effect, part of a single project with an overall advantage margin and the contracts are performed concurrently or in a continuous sequence. (c) 10A contract whitethorn provide for the construction of an spare asset at the option of the customer or may be amended to include the construction of an additional asset. The construction of the addi tional asset shall be treated as a separate construction contract when (a) the asset differs signifi cornersto displacely in design, technology or function from the asset or assets covered by the original contract or the price of the asset is negotiated without regard to the original contract price. b) IFRS Foundation A617 IAS 11 Contract revenue 11 Contract revenue shall comprise (a) (b) the initial tote up of revenue agreed in the contract and genetic mutations in contract work, claims and bonus payments (i) (ii) to the extent that it is likely that they entrust result in revenue and they are capable of being reliably measured. 12Contract revenue is measured at the uninfected value of the consideration received or receivable. The measurement of contract revenue is affected by a variety of uncertainties that depend on the gist of future events. The estimates oft need to be revised as events integral and uncertainties are resolved. Therefore, the nitty-gritty of contract r evenue may increase or come down from one period to the next.For example (a) a contractor and a customer may agree variations or claims that increase or decrease contract revenue in a period consequent to that in which the contract was initially agreed the meter of revenue agreed in a fixed price contract may increase as a result of cost escalation clauses the measuring stick of contract revenue may decrease as a result of penalties arising from delays caused by the contractor in the extremity of the contract or when a fixed price contract involves a fixed price per unit of output, contract revenue increases as the number of units is increased. b) (c) (d) 13 A variation is an instruction by the customer for a transfigure in the scope of the work to be performed on a lower floor the contract. A variation may lead to an increase or a decrease in contract revenue. Examples of variations are changes in the specifications or design of the asset and changes in the duration of the contract. A variation is include in contract revenue when (a) (b) it is likely that the customer will approve the variation and the amount of revenue arising from the variation and the amount of revenue suffer be reliably measured. 4 A claim is an amount that the contractor seeks to discover from the customer or a nonher party as reimbursement for cost non included in the contract price. A claim may deck up from, for example, customer caused delays, errors in specifications or design, and disputed variations in contract work. The measurement of the amounts of revenue arising from claims is subject to a high level of uncertainty and often depends on the outcome of negotiations.Therefore, claims are included in contract revenue only when (a) (b) negotiations have reached an advanced(a) pose such that it is probable that the customer will accept the claim and the amount that it is probable will be accepted by the customer tramp be measured reliably. A618 IFRS Foundation IAS 11 15 Incentive payments are additional amounts paid to the contractor if specified performance standards are met or pass alonged. For example, a contract may allow for an incentive payment to the contractor for former(a) closing of the contract.Incentive payments are included in contract revenue when (a) (b) the contract is sufficiently advanced that it is probable that the specified performance standards will be met or exceeded and the amount of the incentive payment can be measured reliably. Contract be 16 Contract cost shall comprise (a) (b) cost that relate this instant to the specific contract be that are attributable to contract activity in general and can be allocated to the contract and such other cost as are specifically chargeable to the customer under(a) the terms of the contract. c) 17 Costs that relate directly to a specific contract include (a) (b) (c) (d) (e) (f) (g) (h) site labour be, including site supervision cost of materials used in construction wear and tear of plant and equipment used on the contract be of moving plant, equipment and materials to and from the contract site costs of hiring plant and equipment costs of design and proficient assistance that is directly related to the contract the estimated costs of rectification and guarantee work, including expect warranty costs and claims from deuce-ace parties.These costs may be reduced by any secondary income that is not included in contract revenue, for example income from the sale of redundant materials and the disposal of plant and equipment at the end of the contract. 18 Costs that may be attributable to contract activity in general and can be allocated to specific contracts include (a) (b) (c) insurance costs of design and technical assistance that are not directly related to a specific contract and construction overheads. IFRS Foundation A619 IAS 11 Such costs are allocated using methods that are systematic and rational and are applied systematically to all costs havi ng similar characteristics. The allocation is based on the convention level of construction activity. Construction overheads include costs such as the preparation and processing of construction personnel payroll. Costs that may be attributable to contract activity in general and can be allocated to specific contracts also include borrowing costs. 9 Costs that are specifically chargeable to the customer under the terms of the contract may include some general administration costs and development costs for which reimbursement is specified in the terms of the contract. Costs that cannot be attributed to contract activity or cannot be allocated to a contract are excluded from the costs of a construction contract.Such costs include (a) (b) (c) (d) 21 general administration costs for which reimbursement is not specified in the contract selling costs inquiry and development costs for which reimbursement is not specified in the contract and depreciation of idle plant and equipment that is not used on a particular contract. 20 Contract costs include the costs attributable to a contract for the period from the date of securing the contract to the final period of the contract.However, costs that relate directly to a contract and are incurred in securing the contract are also included as part of the contract costs if they can be separately identified and measured reliably and it is probable that the contract will be obtained. When costs incurred in securing a contract are accepted as an expense in the period in which they are incurred, they are not included in contract costs when the contract is obtained in a subsequent period.Recognition of contract revenue and expenses 22 When the outcome of a construction contract can be estimated reliably, contract revenue and contract costs associated with the construction contract shall be accepted as revenue and expenses respectively by reference to the stage of completion of the contract activity at the end of the reporting p eriod. An anticipate redness on the construction contract shall be recognised as an expense immediately in accordance with paragraph 36.In the case of a fixed price contract, the outcome of a construction contract can be estimated reliably when all the following conditions are satisfied (a) (b) total contract revenue can be measured reliably it is probable that the sparing benefits associated with the contract will flow to the entity both the contract costs to complete the contract and the stage of contract completion at the end of the reporting period can be measured reliably and 23 (c) A620 IFRS Foundation IAS 11 (d) he contract costs attributable to the contract can be clearly identified and measured reliably so that certain contract costs incurred can be compared with prior estimates. 24 In the case of a cost plus contract, the outcome of a construction contract can be estimated reliably when all the following conditions are satisfied (a) it is probable that the economic be nefits associated with the contract will flow to the entity and the contract costs attributable to the contract, whether or not specifically reimbursable, can be clearly identified and measured reliably. b) 25 The recognition of revenue and expenses by reference to the stage of completion of a contract is often referred to as the percentage of completion method. Under this method, contract revenue is matched with the contract costs incurred in reaching the stage of completion, resulting in the reporting of revenue, expenses and profit which can be attributed to the proportion of work completed. This method provides useful information on the extent of contract activity and performance during a period.Under the percentage of completion method, contract revenue is recognised as revenue in profit or detriment in the accounting periods in which the work is performed. Contract costs are usually recognised as an expense in profit or loss in the accounting periods in which the work to whic h they relate is performed. However, any expected excess of total contract costs over total contract revenue for the contract is recognised as an expense immediately in accordance with paragraph 36.A contractor may have incurred contract costs that relate to future activity on the contract. Such contract costs are recognised as an asset provided it is probable that they will be vulcanized. Such costs represent an amount due from the customer and are often classified as contract work in mount. The outcome of a construction contract can only be estimated reliably when it is probable that the economic benefits associated with the contract will flow to the entity.However, when an uncertainty arises about the collectibility of an amount already included in contract revenue, and already recognised in profit or loss, the spoilt amount or the amount in respect of which recovery has ceased to be probable is recognised as an expense rather than as an adaptation of the amount of contract re venue. An entity is generally able to make reliable estimates later it has agreed to a contract which establishes (a) (b) (c) each partys enforceable rights regarding the asset to be constructed the consideration to be exchanged and the manner and terms of settlement. 6 27 28 29 It is also usually necessary for the entity to have an effective internal financial budgeting and reporting system. The entity reviews and, when necessary, revises the estimates of contract revenue and contract costs as the contract climb ones. The need for such revisions does not necessarily indicate that the outcome of the contract cannot be estimated reliably. IFRS Foundation A621 IAS 11 30 The stage of completion of a contract may be determined in a variety of ways. The entity uses the method that measures reliably the work performed.Depending on the nature of the contract, the methods may include (a) (b) (c) the proportion that contract costs incurred for work performed to date bear to the estimated total contract costs surveys of work performed or completion of a physical proportion of the contract work. procession payments and advances received from customers often do not reflect the work performed. 31 When the stage of completion is determined by reference to the contract costs incurred to date, only those contract costs that reflect work performed are included in costs incurred to date.Examples of contract costs which are excluded are (a) contract costs that relate to future activity on the contract, such as costs of materials that have been delivered to a contract site or set aside for use in a contract but not yet installed, used or applied during contract performance, unless the materials have been made specially for the contract and payments made to subcontractors in advance of work performed under the subcontract. (b) 32When the outcome of a construction contract cannot be estimated reliably (a) revenue shall be recognised only to the extent of contract costs incurred that it is probable will be recoverable and contract costs shall be recognised as an expense in the period in which they are incurred. (b) An expected loss on the construction contract shall be recognised as an expense immediately in accordance with paragraph 36. 33 During the early stages of a contract it is often the case that the outcome of the contract cannot be estimated reliably.Nevertheless, it may be probable that the entity will recover the contract costs incurred. Therefore, contract revenue is recognised only to the extent of costs incurred that are expected to be recoverable. As the outcome of the contract cannot be estimated reliably, no profit is recognised. However, even though the outcome of the contract cannot be estimated reliably, it may be probable that total contract costs will exceed total contract revenues.In such cases, any expected excess of total contract costs over total contract revenue for the contract is recognised as an expense immediately in accordan ce with paragraph 36. Contract costs that are not probable of being recovered are recognised as an expense immediately. Examples of circumstances in which the recoverability of contract costs incurred may not be probable and in which contract costs may need to be recognised as an expense immediately include contracts (a) that are not fully enforceable, ie their hardiness is seriously in question 34 A622 IFRS Foundation IAS 11 (b) (c) (d) (e) 5 the completion of which is subject to the outcome of pending litigation or code relating to properties that are likely to be condemned or expropriated where the customer is unable to proper its obligations or where the contractor is unable to complete the contract or other meet its obligations under the contract. When the uncertainties that prevented the outcome of the contract being estimated reliably no longer exist, revenue and expenses associated with the construction contract shall be recognised in accordance with paragraph 22 rather than in accordance with paragraph 32.Recognition of expected losses 36 When it is probable that total contract costs will exceed total contract revenue, the expected loss shall be recognised as an expense immediately. 37 The amount of such a loss is determined irrespective of (a) (b) (c) whether work has commenced on the contract the stage of completion of contract activity or the amount of mesh expected to arise on other contracts which are not treated as a single construction contract in accordance with paragraph 9. Changes in estimates 8 The percentage of completion method is applied on a cumulative basis in each accounting period to the current estimates of contract revenue and contract costs. Therefore, the effect of a change in the estimate of contract revenue or contract costs, or the effect of a change in the estimate of the outcome of a contract, is accounted for as a change in accounting estimate (see IAS 8 Accounting Policies, Changes in Accounting Estimates and Errors) . The changed estimates are used in the determination of the amount of revenue and expenses recognised in profit or loss in the period in which the change is made and in subsequent periods.Disclosure 39 An entity shall disclose (a) (b) the amount of contract revenue recognised as revenue in the period the methods used to determine the contract revenue recognised in the period and the methods used to determine the stage of completion of contracts in progress. (c) IFRS Foundation A623 IAS 11 40 An entity shall disclose each of the following for contracts in progress at the end of the reporting period (a) the inwardness amount of costs incurred and recognised profits (less recognised losses) to date the amount of advances received and the amount of retentions. b) (c) 41 Retentions are amounts of progress billings that are not paid until the satisfaction of conditions specified in the contract for the payment of such amounts or until defects have been rectified. Progress billings are amounts billed for work performed on a contract whether or not they have been paid by the customer. Advances are amounts received by the contractor before the related work is performed. An entity shall present (a) (b) the gross amount due from customers for contract work as an asset and the gross amount due to customers for contract work as a liability. 2 43 The gross amount due from customers for contract work is the net amount of (a) (b) costs incurred plus recognised profits less the sum of recognised losses and progress billings for all contracts in progress for which costs incurred plus recognised profits (less recognised losses) exceeds progress billings. 44 The gross amount due to customers for contract work is the net amount of (a) (b) costs incurred plus recognised profits less the sum of recognised losses and progress billings or all contracts in progress for which progress billings exceed costs incurred plus recognised profits (less recognised losses). 45 An entity disclo ses any contingent liabilities and contingent assets in accordance with IAS 37 Provisions, Contingent Liabilities and Contingent Assets. Contingent liabilities and contingent assets may arise from such items as warranty costs, claims, penalties or possible losses. Effective date 46 This Standard becomes operative for financial statements covering periods beginning on or after 1 January 1995. A624 IFRS Foundation